Clutch and brake bumper

[Chuck41]

Dumb question. The rubber bumpers on the clutch and brake rods -- aren't the rods supposed to move through them? In other words shouldn't they be affixed to the firewall somehow? Or do they move in and out with the rods (that's what mine do, seems odd).

[deuce lover]

What year vehicle?

[Chuck41]

41 Ford

[Ford Freak]

On my '37 they are not affixed to the firewall. They are '39 rods,& move in & out w/the rods.

[Kube]

Originally Posted by Chuck41

Dumb question. The rubber bumpers on the clutch and brake rods -- aren't the rods supposed to move through them? In other words shouldn't they be affixed to the firewall somehow? Or do they move in and out with the rods (that's what mine do, seems odd).

In '41, they move with the pedals.

[Chuck41]

Sponsored Links (Register now to hide all advertisements)

Thanks, I knew you all would have the answer. It seems wonky because the clutch bumper goes down and squishes kind of sideways against the frame rail.

[19Fordy]

Can you trim the bumper? Or glue it to floor board with Contac cement?

[Clem Clement]

On my '390 Pickup, I seem to have engine mount-like biscuits mounts to the angled steel floor board. Also a sheet of foam.

[Chuck41]

Originally Posted by 19Fordy

Can you trim the bumper? Or glue it to floor board with Contac cement?

That's what I was thinking. Or the black weatherstrip adhesive.

[JayChicago]

Originally Posted by Chuck41

It seems wonky because the clutch bumper goes down and squishes kind of sideways against the frame rail.

The clutch pedal bumper should be narrower on one side, to just clear the frame rail. Bob Drake catalog has a good picture of it:https://bobdrake.com/products/1939-4...f298bf9b&_ss=r

[Kube]

Originally Posted by Chuck41

That's what I was thinking. Or the black weatherstrip adhesive.

They do occasionally require a bit of trimming. Especially if the bushings are badly worn in the arms.