|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: May 2010
Location: Salt Lake City
Posts: 146
|
![]()
A gentleman just asked me what the 4 square holes and the corresponding center hole are for in this Model A Coupe door inner panel.
I don't know, so I came to you all. Is it for adjustment? |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Dec 2014
Location: Shawnee, Ok
Posts: 3,479
|
![]()
What year?
__________________
Keith Shawnee OK '31 SW 160-B |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Salt Lake City
Posts: 146
|
![]()
1930 Coupe
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Salt Lake City
Posts: 146
|
![]()
Anyone?
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jun 2020
Location: Fall Creek, WI
Posts: 237
|
![]()
Isn’t it to receive the window regulator?
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: Salt Lake City
Posts: 146
|
![]() |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: 215 E. 6th Street Northport, Michigan 49670
Posts: 1,005
|
![]()
It holds the window track assembly that brings the glass up and down.
__________________
Bob from Northport Northport, Michigan |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: May 2010
Location: Salt Lake City
Posts: 146
|
![]() |
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: May 2010
Location: 215 E. 6th Street Northport, Michigan 49670
Posts: 1,005
|
![]()
The upper one is for the crank handle that has an arm on it. It attaches to a long wide bar that the glass sits in It in turn attaches to the crank arm. I'll send photos this afternoon.
I have a coupe in my shop with the doors completely opened up
__________________
Bob from Northport Northport, Michigan |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: May 2010
Location: Salt Lake City
Posts: 146
|
![]()
Thanks.
All my doors (currently 4 of them in the shop) only had the 3-hole window crank/regulator assembly mounted in the holes diagonal from the circled area. My build has been so slow I'd never thought about the other square holes until I was asked. |
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: May 2010
Location: 215 E. 6th Street Northport, Michigan 49670
Posts: 1,005
|
![]()
I misspoke. The four holes are NOT used at all on a coupe. They are the same as a four door car. The four holes are where to door opening handle mount. Coupes are different.
This photo of the drivers on a sport coupe might help. Ford may have used the same panels in different car doors
__________________
Bob from Northport Northport, Michigan Last edited by Bob from Northport; 01-24-2022 at 09:39 PM. |
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: May 2010
Location: Salt Lake City
Posts: 146
|
![]()
The mystery continues! Thanks.
|
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: Jul 2018
Location: Dallas, TX, Angola, IN
Posts: 164
|
![]()
Mounting holes for optional power window regulator.
|
![]() |
![]() |
![]() |
#14 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 2,028
|
![]()
Ford put that feature there so we can easily pick out coupe doors at swap meets, auctions, dusty barns, and in past times junkyard door piles.
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|