The Ford Barn

JD-OHIO · 03-27-2021, 02:55 PM

How to get a hub cap to not be loose when installing on a '31.

aermotor · 03-27-2021, 03:37 PM

Put clear silicone on the back side before installing wheel.
John

McMimmcs · 03-27-2021, 06:48 PM

Only turn over every other ear and then lots of silicone.

1946 · 03-27-2021, 07:09 PM

Sponsored Links (Register now to hide all advertisements)

To create an easy removal and less mess try a very thin "O" ring, ie. the rubber rings for sealing joints. I have even seen rubber band used as a stand by measure.

03-27-2021, 02:55 PM	#1
JD-OHIO Member Join Date: Jan 2020 Posts: 48	Hub Cap Install How to get a hub cap to not be loose when installing on a '31.

03-27-2021, 03:37 PM	#2
aermotor Senior Member Join Date: Mar 2015 Location: Greenville, SC Posts: 1,099	Re: Hub Cap Install Put clear silicone on the back side before installing wheel. John

03-27-2021, 06:48 PM	#3
McMimmcs Senior Member Join Date: Sep 2019 Location: Fort Gratiot, Michigan Posts: 2,296	Re: Hub Cap Install Only turn over every other ear and then lots of silicone.

03-27-2021, 07:09 PM	#4
1946 Member Join Date: Jun 2012 Location: Tasmania Australia Posts: 84	Re: Hub Cap Install Sponsored Links (Register now to hide all advertisements) To create an easy removal and less mess try a very thin "O" ring, ie. the rubber rings for sealing joints. I have even seen rubber band used as a stand by measure. __________________ Tassie Devil