|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-26-2021, 05:28 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
'40 Part ID & source
Please see photos. This is the channel that screws to the front of the door jamb edge, and the kick panel fits into it, plus it retains the windlace in that area. The side I do have is pretty beat up, so I would like to find a replacement ones. Does someone have a part # for this piece or source for it ? Thank you.
|
02-26-2021, 06:12 PM | #2 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,001
|
Re: '40 Part ID & source
You could actually use other kick panel strips like this
https://www.macsautoparts.com/ford-p...BoCOiIQAvD_BwE or Bob Drake has these kick panel retainers strips. https://bobdrake.com/products/1937-4...8e5907ab&_ss=r C and G has kick panel retainer strips also. https://cgfordparts.com/ufolder/cgca...&searchnumber= or you could make your own. Last edited by 19Fordy; 02-26-2021 at 06:36 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
02-27-2021, 07:43 AM | #3 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
Re: '40 Part ID & source
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|