The Ford Barn

ford nut · 11-07-2020, 11:50 PM

saw these on ebay.. . .anybody bought them?

critter · 11-10-2020, 02:51 AM

Hi ford nut. No I have not seen them, but, I'm interested , Had a look on ebay but couldn't find them, Could you give me more info please. I'm in Australia. Cheers critter

ford nut · 11-10-2020, 03:47 AM

Quote:

Originally Posted by critter

Hi ford nut. No I have not seen them, but, I'm interested , Had a look on ebay but couldn't find them, Could you give me more info please. I'm in Australia. Cheers critter

i cannot. i saw them again on craigslist, maybe sacramento ca. although i just looked and don't see them now. a person could save some ratty fenders with those. i think they were 85.00 each. i saw them about 2 months ago and saved the pics. good luck. i hope this is not a tease.

supereal · 11-10-2020, 11:15 AM

If the inside edge of the fender is flat, it is likely for a woodie or a truck. They were somewhat rare, so many were auctioned off when a dealer closed. For someone who needs them, they are very valuable.

Gary Tosel · 11-10-2020, 03:59 PM

I have seen them on Ebay Motors with Vintage Parts and Accessories for 1936 Ford.

GB SISSON · 11-10-2020, 04:32 PM

Sponsored Links (Register now to hide all advertisements)

I wonder if there is a commercial outfit making them. Look an awful lot like '40-'47 pickup and should work on a panel since it's just the outer edge.

ford nut · 11-10-2020, 04:57 PM

my ebay search was 1936 fenders. the radius may work for others if they should ever turn up again. i was kind of hoping that someone would have some solid info on them. i got past my rear fender problem by working the lip for about 3 days with a 2 inch metal form i ground out and fitted with lots of tapping, shrinking. i'v got one more fender to do.

Blastfromthepast · 11-10-2020, 05:12 PM

They are on eBay right now
1936 reproduction Ford left and right rear wheel arch
For Ford 1936 sedan. May fit others. Check it out.
Item number 174001668098

ford nut · 11-10-2020, 05:59 PM

Quote:

Originally Posted by Blastfromthepast

They are on eBay right now
1936 reproduction Ford left and right rear wheel arch
For Ford 1936 sedan. May fit others. Check it out.
Item number 174001668098

thats great! get em' while they're hot. . . .

Blastfromthepast · 11-10-2020, 06:27 PM

With the price of fenders they’re worth the $85.00
Hope they work for you.

ford nut · 11-10-2020, 07:14 PM

i finally got past my messed up fender,had to add i bit of new metal to it, but not the lip. the rear point is new. the lip was the worst part but i was able to save it. here's a some pics. one to go.

Blastfromthepast · 11-11-2020, 04:20 PM

Very nice, great job. Hope those fender lips work you. Will save a lot of time.

11-10-2020, 02:51 AM	#2
critter Junior Member Join Date: Jun 2020 Location: Melbourne AUS Posts: 10	Re: anybody seen these? Hi ford nut. No I have not seen them, but, I'm interested , Had a look on ebay but couldn't find them, Could you give me more info please. I'm in Australia. Cheers critter

11-10-2020, 11:15 AM	#4
supereal Senior Member Join Date: Jul 2014 Location: Iowa Posts: 1,634	Re: anybody seen these? If the inside edge of the fender is flat, it is likely for a woodie or a truck. They were somewhat rare, so many were auctioned off when a dealer closed. For someone who needs them, they are very valuable.

11-10-2020, 03:59 PM	#5
Gary Tosel Senior Member Join Date: May 2010 Location: Minnesota Posts: 1,230	Re: anybody seen these? I have seen them on Ebay Motors with Vintage Parts and Accessories for 1936 Ford.

11-10-2020, 04:32 PM	#6
GB SISSON Senior Member Join Date: Jan 2014 Location: Orcas Island Washington Posts: 5,881	Re: anybody seen these? Sponsored Links (Register now to hide all advertisements) I wonder if there is a commercial outfit making them. Look an awful lot like '40-'47 pickup and should work on a panel since it's just the outer edge. __________________ Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1946 Tonner Pickup with 226 H six, 1979 Toyota landcruiser wagon, now wearing 1947 Ford Jailbar sheet metal. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson)

11-10-2020, 04:57 PM	#7
ford nut Senior Member Join Date: Aug 2013 Location: rosemead ca. Posts: 581	Re: anybody seen these? my ebay search was 1936 fenders. the radius may work for others if they should ever turn up again. i was kind of hoping that someone would have some solid info on them. i got past my rear fender problem by working the lip for about 3 days with a 2 inch metal form i ground out and fitted with lots of tapping, shrinking. i'v got one more fender to do.

11-10-2020, 05:12 PM	#8
Blastfromthepast Senior Member Join Date: May 2017 Location: NY Posts: 320	Re: anybody seen these? They are on eBay right now 1936 reproduction Ford left and right rear wheel arch For Ford 1936 sedan. May fit others. Check it out. Item number 174001668098

11-10-2020, 06:27 PM	#10
Blastfromthepast Senior Member Join Date: May 2017 Location: NY Posts: 320	Re: anybody seen these? With the price of fenders they’re worth the $85.00 Hope they work for you.

11-11-2020, 04:20 PM	#12
Blastfromthepast Senior Member Join Date: May 2017 Location: NY Posts: 320	Re: anybody seen these? Very nice, great job. Hope those fender lips work you. Will save a lot of time.