The Ford Barn

Makinmo · 10-06-2020, 04:46 PM

Hi guys, thanks for letting me join. I have been reading post on here for the last couple of weeks and i have gotten some awesome info. I have recently acquired a 54 Mainline ute with a non running 8BA. The heads are in getting crack tested and cleaned up. I was just wondering if anyone knew if i could get a hold of one of KiWinUS's L100 cams any where in Australia? Or if it was something i could just get ground from my original cam over here? The plan is to build just a cruiser, something good for long distance highway cruising but sounds cool around town without being a slug off the line. You know the best of everything as cheap as possible.

Any help is greatly appreciated.

10-06-2020, 04:46 PM	#1
Makinmo Junior Member Join Date: Oct 2020 Location: Lara, Victoria Posts: 4	Hi from Oz Hi guys, thanks for letting me join. I have been reading post on here for the last couple of weeks and i have gotten some awesome info. I have recently acquired a 54 Mainline ute with a non running 8BA. The heads are in getting crack tested and cleaned up. I was just wondering if anyone knew if i could get a hold of one of KiWinUS's L100 cams any where in Australia? Or if it was something i could just get ground from my original cam over here? The plan is to build just a cruiser, something good for long distance highway cruising but sounds cool around town without being a slug off the line. You know the best of everything as cheap as possible. Any help is greatly appreciated.