|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Mar 2020
Location: Charlotte NC
Posts: 63
|
![]()
My 31 has two bulbs in the headlights. I know the bigger bulb is low/high beam but what is the smaller bulb for above it?
Thanks |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 9,360
|
![]()
Parking light.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Dec 2014
Location: Germantown,TN
Posts: 574
|
![]()
Parking/running light.
Move your light switch to the left and they should come on. |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jun 2014
Location: Land of Lincoln
Posts: 3,431
|
![]()
Turn signal, day time running light it could be anything you can dream up! Bob's answer the correct way.
__________________
Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done |
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Mar 2020
Location: Charlotte NC
Posts: 63
|
![]() |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,305
|
![]() Sponsored Links (Register now to hide all advertisements)
Charlie Stephens |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2019
Location: Fort Worth side of DFW
Posts: 181
|
![]()
I have the two bulb headlight and planning to use the parking lights as turn signals either internal or external to the headlight. I plan to replace the reflectors as the reflective silvering is in very bad shape so My question is if I use internal turn signal lights I do not need to change the reflector "style" but if I go with external blinkers I need to change the reflector to the single bulb style (or just leave an unused bulb in the dual reflector.)
IF I go with a single bulb reflector will the dual bulb (headlight) socket work with the single bulb reflector? I like the idea of internal turn lights but I have read where you cannot see the blinkers if the headlights are on so thinking external would be better but no turn signals on the car now so seems like whatever set up someone likes... |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,247
|
![]()
The only difference between reflectors is the extra socket holder. The sockets themselves are part of the internal harness. You can just clip the extra socket off to use in a single-bulb reflector. External signals need their own wiring anyway, so you could just leave your headlights 2-bulb so you would still have front parking lights.
|
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Mar 2020
Location: Charlotte NC
Posts: 63
|
![]() |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,441
|
![]()
Mine too. Someone at some point either changed reflectors or added cowl lights. The alright, part of my car's history that I will never know about.
__________________
Ruth "Sometimes you really DO need to read the whole thread" |
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,247
|
![]()
Same here. The headlights were messed up inside so I replaced the cheapo chrome 1-bulb reflectors with original 2-bulb ones and added wiring in parallel with the cowl lamps. My original intention was to use the cowl lamps for turn signals, but I ended up getting all lights to work both ways. (That's another story.)
|
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: Aug 2016
Location: Alberta
Posts: 930
|
![]() |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|