The Ford Barn

Daddysearly30pickup · 04-20-2020, 09:55 PM

I purchased floorboard for pickup with emergency brake to right of shifter.
Size is perfect, however only the 2 screw holes closest to the seat base line up. Holes on each side are off as much as 1/2".

Vendor spent a while on the phone, graciously checking their inventory and verified screw holes in all floorboards their inventory were the same, and screw hole locations provided match what I received. Very nice and helpful.

The side holes in the boards provided are 2 1/2" from the front edge and 3 3/4" from the rear edge. Measuring the threaded holes in the cab floor, mine need to be 3" from the front and 3 1/2" from the rear.

Holes need to be moved so little they will likely veer off into existing holes when re-drilled.

Wondering if anyone has experienced similar and how they addressed this?

Thanks

04-20-2020, 09:55 PM	#1
Daddysearly30pickup Member Join Date: Dec 2019 Posts: 46	Early 30 Pickup Floorboard Quandry I purchased floorboard for pickup with emergency brake to right of shifter. Size is perfect, however only the 2 screw holes closest to the seat base line up. Holes on each side are off as much as 1/2". Vendor spent a while on the phone, graciously checking their inventory and verified screw holes in all floorboards their inventory were the same, and screw hole locations provided match what I received. Very nice and helpful. The side holes in the boards provided are 2 1/2" from the front edge and 3 3/4" from the rear edge. Measuring the threaded holes in the cab floor, mine need to be 3" from the front and 3 1/2" from the rear. Holes need to be moved so little they will likely veer off into existing holes when re-drilled. Wondering if anyone has experienced similar and how they addressed this? Thanks