The Ford Barn

35Fordpickup · 12-19-2019, 05:01 PM

I have two questions related to the radiator for a 35 Ford pickup. 1) What is the correct length of the support rods that run from the radiator to the cab? 2) Walker lists a rad for the 35, is the radiator for the pickup the same as for a car?
Thanks

KiWinUS · 12-19-2019, 05:32 PM

35 pickup is 1 year & pickup only. 36 or car will not fit.

Don Rogers · 12-19-2019, 07:17 PM

35 Pickup radiator is significantly different from the passenger car. The filler neck is in the center for a 35 pickup radiator while it is offset for the passenger car. Here are some images that should help.

35Fordpickup · 12-21-2019, 07:36 PM

Sponsored Links (Register now to hide all advertisements)

Thanks Don. I read somewhere that the rod diameter is 5/16". Does that mean that the threads at the "nut" end is 5/16 and the threads at the "carriage bolt head" end is 3/8?

12-19-2019, 05:01 PM	#1
35Fordpickup Junior Member Join Date: Nov 2017 Posts: 16	35 Ford pickup radiator I have two questions related to the radiator for a 35 Ford pickup. 1) What is the correct length of the support rods that run from the radiator to the cab? 2) Walker lists a rad for the 35, is the radiator for the pickup the same as for a car? Thanks

12-19-2019, 05:32 PM	#2
KiWinUS Senior Member Join Date: May 2010 Location: Charlotte NC KiWi-L100 available here Posts: 3,262	Re: 35 Ford pickup radiator 35 pickup is 1 year & pickup only. 36 or car will not fit.

12-21-2019, 07:36 PM	#4
35Fordpickup Junior Member Join Date: Nov 2017 Posts: 16	Re: 35 Ford pickup radiator Sponsored Links (Register now to hide all advertisements) Thanks Don. I read somewhere that the rod diameter is 5/16". Does that mean that the threads at the "nut" end is 5/16 and the threads at the "carriage bolt head" end is 3/8?