The Ford Barn

pjdeb · 11-05-2019, 04:50 PM

Anyone had luck freeing it up? Pictures. Turning the gear by hand moves all but the last (left) wheels.

That small retaining spring looks tough to get off/on.

Anyone sell the assembly. Rest of the speedo is good.

ronn · 11-06-2019, 07:30 AM

just buy a rebuilt off papanick and sell yours off or use it as a core.

31Tudor · 11-06-2019, 01:46 PM

Or... No known website: Harry Warburton (252)-258-1530/(252)-752-4098 (N. Carolina)

He cleaned mine up, in a very reasonable time.

Mark in MT · 11-06-2019, 05:14 PM

Sponsored Links (Register now to hide all advertisements)

Looks like a Waltham, the washer on the end will press off with a little effort. Done wrong and you can distort the wheels which will cause more binding. Nineteen pieces in the odometer assy, and they need to be timed or it will not work. Oft times the grease that the maker put in there 90 years ago has turned to concrete. A clean and lube is recommended, the tricky part is getting it all back together so that it works.

Mark
www.marksspeedometer.com

11-06-2019, 07:30 AM	#2
ronn Senior Member Join Date: Feb 2011 Location: NNNNNNNNJJJJJJJJJJ Posts: 7,647	Re: Odo Stuck - 1930 Round just buy a rebuilt off papanick and sell yours off or use it as a core.

11-06-2019, 01:46 PM	#3
31Tudor Senior Member Join Date: May 2010 Location: North Carolina Posts: 611	Re: Odo Stuck - 1930 Round Or... No known website: Harry Warburton (252)-258-1530/(252)-752-4098 (N. Carolina) He cleaned mine up, in a very reasonable time.

11-06-2019, 05:14 PM	#4
Mark in MT Senior Member Join Date: May 2010 Location: Western MT Posts: 218	Re: Odo Stuck - 1930 Round Sponsored Links (Register now to hide all advertisements) Looks like a Waltham, the washer on the end will press off with a little effort. Done wrong and you can distort the wheels which will cause more binding. Nineteen pieces in the odometer assy, and they need to be timed or it will not work. Oft times the grease that the maker put in there 90 years ago has turned to concrete. A clean and lube is recommended, the tricky part is getting it all back together so that it works. Mark www.marksspeedometer.com __________________ Mark in MT Always looking for another opportunity to be wrong.