The Ford Barn

elwood · 06-19-2019, 03:56 PM

hey guys, im needing to know the thread pitch on the fuel inlet for a 8ba script carb ..
is this one right ?
thanks

https://www.carburetor-parts.com/Bra...rb_p_3511.html

Ronnie · 06-19-2019, 04:20 PM

Says 5/8 x 18 on the web page.
R

38bill · 06-19-2019, 04:27 PM

https://www.parts123.com/parts123/yb...Z5Z5Z50000106a

1/2-20 X 3/8 per Vintage Speed.

petehoovie · 06-19-2019, 06:31 PM

CARB FITTING 1/2-20 X 3/8"/HOSE/B 97- 94 Fuel Fitting-Brass This is the special fitting you need to screw into the fuel inlet on your Stromberg 97 and Holley 94 carbs.This is the eelco style fitting from the 50's, and has the correct Ford taper on the end to seal inside your carb. It is used with 3/8"ID rubber and plastic hose.Fitting is in brass. Sorry about the price on this fitting but it is custom made for us in small runs. - $8.75 Ea.

https://www.parts123.com/parts123/yb...Z5Z5Z50000106a

JSeery · 06-19-2019, 07:02 PM

That price doesn't seem bad to me!

elwood · 06-19-2019, 10:28 PM

Sponsored Links (Register now to hide all advertisements)

Pete those are what Im looking for,
Thanks,

petehoovie · 06-19-2019, 11:38 PM

Thanks to 38bill....

elwood · 06-20-2019, 07:37 AM

Yes sir, thank you 38bill

38bill · 06-20-2019, 10:08 AM

Thanks to Ford Barn!

06-19-2019, 04:20 PM	#2
Ronnie Senior Member Join Date: May 2010 Location: Canada Where it snows Posts: 2,059	Re: fuel fitting Says 5/8 x 18 on the web page. R

06-19-2019, 04:27 PM	#3
38bill Senior Member Join Date: Apr 2014 Location: Minnesota Posts: 1,200	Re: fuel fitting https://www.parts123.com/parts123/yb...Z5Z5Z50000106a 1/2-20 X 3/8 per Vintage Speed.

06-19-2019, 06:31 PM	#4
petehoovie Senior Member Join Date: May 2015 Posts: 10,160	Re: fuel fitting CARB FITTING 1/2-20 X 3/8"/HOSE/B 97- 94 Fuel Fitting-Brass This is the special fitting you need to screw into the fuel inlet on your Stromberg 97 and Holley 94 carbs.This is the eelco style fitting from the 50's, and has the correct Ford taper on the end to seal inside your carb. It is used with 3/8"ID rubber and plastic hose.Fitting is in brass. Sorry about the price on this fitting but it is custom made for us in small runs. - $8.75 Ea. https://www.parts123.com/parts123/yb...Z5Z5Z50000106a Last edited by petehoovie; 06-19-2019 at 07:11 PM.

06-19-2019, 07:02 PM	#5
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: fuel fitting That price doesn't seem bad to me!

06-19-2019, 10:28 PM	#6
elwood Senior Member Join Date: May 2010 Location: Dallas Posts: 1,092	Re: fuel fitting Sponsored Links (Register now to hide all advertisements) Pete those are what Im looking for, Thanks,

06-19-2019, 11:38 PM	#7
petehoovie Senior Member Join Date: May 2015 Posts: 10,160	Re: fuel fitting Thanks to 38bill....

06-20-2019, 07:37 AM	#8
elwood Senior Member Join Date: May 2010 Location: Dallas Posts: 1,092	Re: fuel fitting Yes sir, thank you 38bill

06-20-2019, 10:08 AM	#9
38bill Senior Member Join Date: Apr 2014 Location: Minnesota Posts: 1,200	Re: fuel fitting Thanks to Ford Barn!