Another Barn’s post

[adileo]

A previous post by another Barner got me thinking. In that post I responded that I rewired my stock 6 volt pos ground 52 F1 parking lights to a single bulb turn signal. The brightness of the bulb has never been sufficient in my mind.

What have other F1 owners done?

LED? Stronger bulb? If stronger bulb what number was number?

[texas webb]

Make sure all grounds are good and clean,electrical and metal to metal.

[adileo]

Just took it apart.

Bought housing from LMC not their fault but mine....it’s a 12 volt bulb....my bad.

Still need number for 6 volt and place to purchase...

[estout81]

I changed the bulb sockets to double filament and used 1157 bulbs. Then you can still use the parking lights and have turn signals too.

[V8COOPMAN]

Originally Posted by adileo

Just took it apart.

Bought housing from LMC not their fault but mine....it’s a 12 volt bulb....my bad.

Still need number for 6 volt and place to purchase...

ANDY.....If you're looking for a 6v DUAL filament bulb, to go ANY parts store and ask for an 1154 bulb. If you need a 6v SINGLE filament, take the 12v bulb with you to the parts store and request a 6v equivalent. You're looking for a 5 or 6 WATT bulb for NON-brake light purposes, as in a parking !ight. DD

[adileo]

Sponsored Links (Register now to hide all advertisements)

Thanks DD!