The Ford Barn

Ron Emerson · 01-05-2018, 06:48 PM

Hi Guys, I was wondering how to check a dist. from a 1935 ford, I don't have spark to the plugs. Is there a way to check the coil and condenser, the points are opening and closing. It has a stock distributer in it as is the original motor it is showing 44,000 miles on the odometer.Thanks Ron. If it is easier to email me it is [email protected] again.

Lawrie · 01-05-2018, 10:49 PM

Sponsored Links (Register now to hide all advertisements)

An easy check is to see if there is a drop on the amp meter when you turn on the ign,and crank the engine,you should see it fluctuate if the points are opening and closing.
Lawrie

01-05-2018, 06:48 PM	#1
Ron Emerson Junior Member Join Date: Jan 2017 Location: Dunnellon Florida Posts: 24	1935 distributers Hi Guys, I was wondering how to check a dist. from a 1935 ford, I don't have spark to the plugs. Is there a way to check the coil and condenser, the points are opening and closing. It has a stock distributer in it as is the original motor it is showing 44,000 miles on the odometer.Thanks Ron. If it is easier to email me it is [email protected] again.

01-05-2018, 10:49 PM	#2
Lawrie Senior Member Join Date: May 2010 Location: Qld, Australia Posts: 4,529	Re: 1935 distributers Sponsored Links (Register now to hide all advertisements) An easy check is to see if there is a drop on the amp meter when you turn on the ign,and crank the engine,you should see it fluctuate if the points are opening and closing. Lawrie