The Ford Barn

DennisV · 12-31-2017, 05:28 AM

I have a 1932 rear end round flange that was behind a 4 cilinder engine (now with flathead v8) 4.11
I want to change to 3.54 and i understand that the ring and pinion is the same as model A but what about the bearings race and seals ?
Do have to order only model A parts ?
Don't want to spent money on wrong parts.

32phil · 12-31-2017, 09:00 AM

Round flange 32 rear ends are basically Model A rears with different spring hangers.
All internals are Model A.
Torque tubes, driveshafts, radius rods & brakes are different from Model A parts.

DennisV · 12-31-2017, 09:18 AM

Thanks

Gabalus · 01-05-2018, 04:38 PM

Sponsored Links (Register now to hide all advertisements)

Do you have a picture of your round flange 32 rear end ?
How can I see if it's an early or late 32 rear end ?

12-31-2017, 05:28 AM	#1
DennisV Junior Member Join Date: Jan 2013 Posts: 4	1932 rear end parts question I have a 1932 rear end round flange that was behind a 4 cilinder engine (now with flathead v8) 4.11 I want to change to 3.54 and i understand that the ring and pinion is the same as model A but what about the bearings race and seals ? Do have to order only model A parts ? Don't want to spent money on wrong parts.

12-31-2017, 09:00 AM	#2
32phil Senior Member Join Date: May 2010 Location: Montgomery, NY & Port St. Lucie Florida Posts: 975	Re: 1932 rear end parts question Round flange 32 rear ends are basically Model A rears with different spring hangers. All internals are Model A. Torque tubes, driveshafts, radius rods & brakes are different from Model A parts. __________________ Early Ford Lock & Key Service https://www.fordbarn.com/forum/showthread.php?t=46583

12-31-2017, 09:18 AM	#3
DennisV Junior Member Join Date: Jan 2013 Posts: 4	Re: 1932 rear end parts question Thanks

01-05-2018, 04:38 PM	#4
Gabalus Senior Member Join Date: Jul 2012 Location: France Posts: 113	Re: 1932 rear end parts question Sponsored Links (Register now to hide all advertisements) Do you have a picture of your round flange 32 rear end ? How can I see if it's an early or late 32 rear end ?