The Ford Barn

Mart · 03-26-2021, 08:28 AM

Hello! Welcome to Mart's Garage. 2 Videos this week. Let's call 'em Part 1 and Part 2.

Part 1:

Feeling a bit burnt out after the big push on the Ol' 59 Flatty, I found myself looking at a little mini project on the old 41 pickup. I salvaged some steel from next door. I realised I could make something from it and it was about time the truck came under the spotlight. Follow along as I indulge in some low pressure tinkering, involving my favourite material.. Stuff I got for free! Who can't resist a bit of something for nothing.
I'm trialling a new format this week, two shorter videos. Lets see how it goes.
Make sure you check out part 2.
All the best, Mart.

https://youtu.be/iFXLQlMlx28

Part 2:

Sooo. That old 59 Flatty then. It runs, but hand on heart I'm disappointed. I want to address some issues so decide to pull it back out. Follow along while I do just that and let's have a first peek inside.
I'm trialling a new format this week, two shorter videos. Lets see how it goes.
Make sure you check out part 1.
All the best, Mart.

https://youtu.be/QVEp5T4lQT4

corvette8n · 03-26-2021, 11:07 AM

Mart: thanks for posting the videos, one of these days I am going to swap a spare motor into my ‘41 as the current flathead is tired and burns a bit of oil.

VeryTangled · 03-26-2021, 11:17 AM

Mi Mart, Man I feel for you with the camera/card issues! I'm pretty sure some colorful language was appropriate.

I found the sludge interesting. Assuming we'll hear more about that coming up?

19Fordy · 03-26-2021, 11:34 AM

Sponsored Links (Register now to hide all advertisements)

Thanks Mart for the update and tenacity.

03-26-2021, 08:28 AM	#1
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 9,088	Mart's Update 2021 No13. 41 pick up and 59 Flatty. Hello! Welcome to Mart's Garage. 2 Videos this week. Let's call 'em Part 1 and Part 2. Part 1: Feeling a bit burnt out after the big push on the Ol' 59 Flatty, I found myself looking at a little mini project on the old 41 pickup. I salvaged some steel from next door. I realised I could make something from it and it was about time the truck came under the spotlight. Follow along as I indulge in some low pressure tinkering, involving my favourite material.. Stuff I got for free! Who can't resist a bit of something for nothing. I'm trialling a new format this week, two shorter videos. Lets see how it goes. Make sure you check out part 2. All the best, Mart. https://youtu.be/iFXLQlMlx28 Part 2: Sooo. That old 59 Flatty then. It runs, but hand on heart I'm disappointed. I want to address some issues so decide to pull it back out. Follow along while I do just that and let's have a first peek inside. I'm trialling a new format this week, two shorter videos. Lets see how it goes. Make sure you check out part 1. All the best, Mart. https://youtu.be/QVEp5T4lQT4

03-26-2021, 11:07 AM	#2
corvette8n Senior Member Join Date: Jul 2010 Location: 36 miles north of Albany NY Posts: 3,198	Re: Mart's Update 2021 No13. 41 pick up and 59 Flatty. Mart: thanks for posting the videos, one of these days I am going to swap a spare motor into my ‘41 as the current flathead is tired and burns a bit of oil.

03-26-2021, 11:17 AM	#3
VeryTangled Senior Member Join Date: May 2010 Location: (Not far enough...) Outside of DC Posts: 3,395	Re: Mart's Update 2021 No13. 41 pick up and 59 Flatty. Mi Mart, Man I feel for you with the camera/card issues! I'm pretty sure some colorful language was appropriate. I found the sludge interesting. Assuming we'll hear more about that coming up? __________________ -Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum?

03-26-2021, 11:34 AM	#4
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 11,606	Re: Mart's Update 2021 No13. 41 pick up and 59 Flatty. Sponsored Links (Register now to hide all advertisements) Thanks Mart for the update and tenacity.