The Ford Barn

PKW181 · 09-19-2017, 06:05 PM

Anyone know where I can find a 23 Spline 10.5 clutch disc?

Thank you in advance for any help.

paul2748 · 09-19-2017, 07:26 PM

Centerforce??

Dobie Gillis · 09-20-2017, 10:38 AM

If you have one that needs relining take it to a big truck clutch and brake shop.

rotorwrench · 09-20-2017, 11:05 AM

Is this what you are looking for. http://www.ebay.ca/itm/NOS-1960-62-F...FZCk~H&vxp=mtr

PKW181 · 09-20-2017, 09:01 PM

Thanks everyone.
Going to try to find a 312 flywheel that takes an 11" pressure plate as mine will only accept a 10.5. Had bought a 3 speed o/d replacement Trans, but the input shaft has a 23 spline.
Any ideas where to find a new or used flywheel ? Summit is trying to locate one, but no luck yet.

Lanny · 09-20-2017, 10:27 PM

Sponsored Links (Register now to hide all advertisements)

Just curious, is this clutch and flywheel going to be used in a heavy '57 vehicle, that you
would want a steel flywheel, or is it a lighter vehicle that you might want alum flywheel ?

.

PKW181 · 09-21-2017, 10:03 AM

The car is a basic 57 Fairlane 500 2 door h/t, will be using it for a semi d/d and cruising around.

paul2748 · 09-21-2017, 07:59 PM

Try the TBird parts guys that also sell used parts. All TBirds (std shift) used 11 inch clutches.

Hills restorations, CASCO, Larry's,

Other guys:

Adrian 570-709-0823 [email protected]
Tony - Tony's Classics 515-263-3606

Quote:

Originally Posted by PKW181

Thanks everyone.
Going to try to find a 312 flywheel that takes an 11" pressure plate as mine will only accept a 10.5. Had bought a 3 speed o/d replacement Trans, but the input shaft has a 23 spline.
Any ideas where to find a new or used flywheel ? Summit is trying to locate one, but no luck yet.

Sid · 09-21-2017, 09:37 PM

To my knowledge all 312's were 11" as well as pick-up trucks with 292's. As far as a daily driver I don't think you would see much difference between a 10.5" or 11" clutch as long as it is a quality brand and not a Chinese rebuilt. I have had good luck with McLeod clutches myself. Basically you will get what you pay for.

09-19-2017, 06:05 PM	#1
PKW181 Member Join Date: May 2011 Location: Northern Arizona Posts: 85	Clutch disc 57 Ford Anyone know where I can find a 23 Spline 10.5 clutch disc? Thank you in advance for any help.

09-19-2017, 07:26 PM	#2
paul2748 Senior Member Join Date: May 2010 Location: Midland Park, NJ Posts: 4,292	Re: Clutch disc 57 Ford Centerforce?? __________________ 48 Ford Conv 56 Tbird 54 Ford Victoria

09-20-2017, 10:38 AM	#3
Dobie Gillis Senior Member Join Date: May 2012 Location: Middle TN Posts: 1,060	Re: Clutch disc 57 Ford If you have one that needs relining take it to a big truck clutch and brake shop.

09-20-2017, 11:05 AM	#4
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 17,411	Re: Clutch disc 57 Ford Is this what you are looking for. http://www.ebay.ca/itm/NOS-1960-62-F...FZCk~H&vxp=mtr

09-20-2017, 09:01 PM	#5
PKW181 Member Join Date: May 2011 Location: Northern Arizona Posts: 85	Re: Clutch disc 57 Ford Thanks everyone. Going to try to find a 312 flywheel that takes an 11" pressure plate as mine will only accept a 10.5. Had bought a 3 speed o/d replacement Trans, but the input shaft has a 23 spline. Any ideas where to find a new or used flywheel ? Summit is trying to locate one, but no luck yet.

09-20-2017, 10:27 PM	#6
Lanny Senior Member Join Date: May 2010 Location: Mn Posts: 2,543	Re: Clutch disc 57 Ford Sponsored Links (Register now to hide all advertisements) Just curious, is this clutch and flywheel going to be used in a heavy '57 vehicle, that you would want a steel flywheel, or is it a lighter vehicle that you might want alum flywheel ? . __________________ If mama ain't happy, ain't nobody happy. But if daddy ain't happy...RUN What I GOT DONE TODAY... I got the rear-end put in the recliner, and now I'm going to rest up & watch TV.

09-21-2017, 10:03 AM	#7
PKW181 Member Join Date: May 2011 Location: Northern Arizona Posts: 85	Re: Clutch disc 57 Ford The car is a basic 57 Fairlane 500 2 door h/t, will be using it for a semi d/d and cruising around.

09-21-2017, 09:37 PM	#9
Sid Senior Member Join Date: May 2010 Location: Rathdrum Idaho Posts: 740	Re: Clutch disc 57 Ford To my knowledge all 312's were 11" as well as pick-up trucks with 292's. As far as a daily driver I don't think you would see much difference between a 10.5" or 11" clutch as long as it is a quality brand and not a Chinese rebuilt. I have had good luck with McLeod clutches myself. Basically you will get what you pay for.