The Ford Barn

leo · 08-12-2017, 03:22 PM

So I dug through my collection of odd's and end's and found this. It's 15/16 outer diameter, 7/8 inner diameter and 1/16 wide. Am I in luck?

Bill in NJ · 08-12-2017, 03:34 PM

I went to pep boys and they hooked me up with a metric one and it is working for me.

JDupuis · 08-13-2017, 06:58 AM

Looks good to me. Does it fit the drain plug?
Thought I heard that a spark plug washer would work as well?
Jeff

BILL WILLIAMSON · 08-13-2017, 09:56 AM

In a pinch, just rub #2 Permatex on the plug threads.
Bill W.

100IH · 08-13-2017, 10:07 AM

Land Rovers use the same one.

duke36 · 08-13-2017, 10:57 AM

Sponsored Links (Register now to hide all advertisements)

We found the copper one to leak, even after filing flat the pan mating surface. Used the fibre type with no leak so far and not overtightening the bolt. Perhaps a little Perm 2 as Bill suggests would help.

Drive Shaft Dave · 08-13-2017, 02:13 PM

I had the same problem,would leak with the washer installed. Took it off and had no leak.

leo · 08-14-2017, 09:09 AM

When you guys say fiber washer, what exactly are we talking about?

katy · 08-14-2017, 11:15 AM

https://www.google.ca/search?q=fibre...w=1024&bih=610

duke36 · 08-14-2017, 11:17 AM

The A vendors sell them either alone or in the kits. They are a hard usually gray or black composition material, not cork. see post 9.

Fullraceflathead · 08-14-2017, 01:08 PM

I believe the originals are the same as the Spark Plug gasket.

leo · 08-14-2017, 02:47 PM

Thanks guys....

08-13-2017, 06:58 AM	#3
JDupuis Senior Member Join Date: Jan 2017 Location: Maryhill Ont Canada Posts: 834	Re: I Need an Oil Pan Drain Plug Gasket Looks good to me. Does it fit the drain plug? Thought I heard that a spark plug washer would work as well? Jeff __________________ Let's let pylons, be pylons!

08-13-2017, 09:56 AM	#4
BILL WILLIAMSON Senior Member Join Date: Dec 2010 Location: FRESNO, CA Posts: 12,560	Re: I Need an Oil Pan Drain Plug Gasket In a pinch, just rub #2 Permatex on the plug threads. Bill W. __________________ "THE ASSISTANT GURU OF STUFF"

08-13-2017, 10:07 AM	#5
100IH Senior Member Join Date: Dec 2011 Location: SW Idaho Posts: 971	Re: I Need an Oil Pan Drain Plug Gasket Land Rovers use the same one.

08-13-2017, 10:57 AM	#6
duke36 Senior Member Join Date: Jun 2015 Posts: 1,425	Re: I Need an Oil Pan Drain Plug Gasket Sponsored Links (Register now to hide all advertisements) We found the copper one to leak, even after filing flat the pan mating surface. Used the fibre type with no leak so far and not overtightening the bolt. Perhaps a little Perm 2 as Bill suggests would help.

08-13-2017, 02:13 PM	#7
Drive Shaft Dave Senior Member Join Date: Dec 2011 Location: New hope Minnesota Posts: 742	Re: I Need an Oil Pan Drain Plug Gasket I had the same problem,would leak with the washer installed. Took it off and had no leak.

08-12-2017, 03:34 PM	#2
Bill in NJ Senior Member Join Date: May 2010 Posts: 1,159	Re: I Need an Oil Pan Drain Plug Gasket I went to pep boys and they hooked me up with a metric one and it is working for me.

08-14-2017, 09:09 AM	#8
leo Senior Member Join Date: May 2010 Location: New Jersey Posts: 734	Re: I Need an Oil Pan Drain Plug Gasket When you guys say fiber washer, what exactly are we talking about?

08-14-2017, 11:15 AM	#9
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,712	Re: I Need an Oil Pan Drain Plug Gasket https://www.google.ca/search?q=fibre...w=1024&bih=610 __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!

08-14-2017, 11:17 AM	#10
duke36 Senior Member Join Date: Jun 2015 Posts: 1,425	Re: I Need an Oil Pan Drain Plug Gasket The A vendors sell them either alone or in the kits. They are a hard usually gray or black composition material, not cork. see post 9.

08-14-2017, 01:08 PM	#11
Fullraceflathead Senior Member Join Date: May 2012 Location: Chillicothe, Missouri Posts: 1,684	Re: I Need an Oil Pan Drain Plug Gasket I believe the originals are the same as the Spark Plug gasket. __________________ "If I asked people what they wanted they would have said faster horses." -Henry Ford "Primitive technology is not a design flaw" 1928 Ford Model A Roadster Pickup 1930 Gordon Smith Air Compressor 1941 Willy's Pickup 1960 Thunderbird-For Sale 1964 Buick Riviera 2x4 425 1965 Pontiac GTO, 455 Super Duty 2004 Dodge Ram SRT-10, V-10 Viper 1977 Charger Jet Boat,460 Ford,Jacuzzi Jet Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford Engine Build up on DVD ask

08-14-2017, 02:47 PM	#12
leo Senior Member Join Date: May 2010 Location: New Jersey Posts: 734	Re: I Need an Oil Pan Drain Plug Gasket Thanks guys....