Tubular Rivet Setting tools

[meric42]

I am about to replace the 1/4 vent rubber seals etc. on my '42 Sedan Delivery and need to find a source for setting tools or punches to set the tubular rivets that are supplied for attaching the seals.

I bought a squeezer but the dies are too large in diameter to fit in the tight spaces to set these rivets, especially on the back edge seal for the 1/4 window which fits on the front of the vertical division bar.

What have others done to complete this job?

Thanks in advance,

Meric.

[Scotty's 52 F3]

Google "vent window rivet setting tool" and you'll find something. I bought a whole kit including the tool and rivets for my 52 truck but, I don't remember where. I THINK it was Mid Fifty or Classic Haulers?

[Greg58]

I bought one from home depot supply, I found it by doing a image search on Google. This looks like what I used. I ordered it on line and picked it up at the store.

[paul2748]

Sponsored Links (Register now to hide all advertisements)

If you can't find one at Home depot, try Big Flats Rivet co.