The Ford Barn

storyteller · 06-26-2016, 08:21 PM

I am in the process of installing a pair of Fenton headers on my 1937 Ford 2-dr flatback sedan. Can I use the same tailpipe on both the passenger side and the driver's side? I will be running Smitys mufflers. I think they have a 2" i.d. pipe on both ends. Any advice from those who have converted over.

Lawson Cox · 06-26-2016, 09:43 PM

No,. the L and R tail pipes are configured differently, that is if you're going with stock pipes.

JSeery · 06-26-2016, 10:49 PM

Sponsored Links (Register now to hide all advertisements)

I would suggest a smaller diameter pipe. 1 3/4 is considered the best dia by some, and should be easier to route.

06-26-2016, 08:21 PM	#1
storyteller Member Join Date: May 2010 Location: Rochester NY Posts: 31	Tailpipe question 37 Ford I am in the process of installing a pair of Fenton headers on my 1937 Ford 2-dr flatback sedan. Can I use the same tailpipe on both the passenger side and the driver's side? I will be running Smitys mufflers. I think they have a 2" i.d. pipe on both ends. Any advice from those who have converted over.

06-26-2016, 09:43 PM	#2
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,082	Re: Tailpipe question 37 Ford No,. the L and R tail pipes are configured differently, that is if you're going with stock pipes. __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".

06-26-2016, 10:49 PM	#3
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: Tailpipe question 37 Ford Sponsored Links (Register now to hide all advertisements) I would suggest a smaller diameter pipe. 1 3/4 is considered the best dia by some, and should be easier to route.