The Ford Barn

Alan O'Connell · 06-12-2016, 08:14 AM

Does anyone, other than Bob Trautwein, make windshield frames for a 1936 Cabriolet?

anothercarguy · 06-12-2016, 10:15 AM

Sponsored Links (Register now to hide all advertisements)

Hi Allan, I picked up a windshield frame at a swap meet that I thought was for a '36 sedan...didn't fit...too narrow. Do you have a measurement for the width of the cabriolet opening...maybe that is what this one fits?

The width outside to outside of the one that I have at the centre (at point of factory split) is 42 3/16" and the height in the centre is 13 3/16". These measurements are taken from the outside of the frame (including the lip that covers the windshield opening.

Tim

Attached Files:

a" data-thumb-height="100">
20150830_124618_resized.jpg
File size:
216.3 KB
Views:
2
20150830_124629_resized.jpg
File size:
257 KB
Views:
2

06-12-2016, 08:14 AM	#1
Alan O'Connell Senior Member Join Date: Oct 2010 Location: Peabody, MA Posts: 486	Windshield frame Does anyone, other than Bob Trautwein, make windshield frames for a 1936 Cabriolet?

06-12-2016, 10:15 AM	#2
anothercarguy Member Join Date: Jan 2013 Location: Bowen island, BC Posts: 74	Re: Windshield frame Sponsored Links (Register now to hide all advertisements) Hi Allan, I picked up a windshield frame at a swap meet that I thought was for a '36 sedan...didn't fit...too narrow. Do you have a measurement for the width of the cabriolet opening...maybe that is what this one fits? The width outside to outside of the one that I have at the centre (at point of factory split) is 42 3/16" and the height in the centre is 13 3/16". These measurements are taken from the outside of the frame (including the lip that covers the windshield opening. Tim Attached Files: a" data-thumb-height="100"> 20150830_124618_resized.jpg File size: 216.3 KB Views: 2 20150830_124629_resized.jpg File size: 257 KB Views: 2