The Ford Barn

1930marie · 11-16-2015, 01:22 AM

Sponsored Links (Register now to hide all advertisements)

Thanks to all for all the suggestions to fix my rich mix fouled plugs problem. I spent only a 1/2 hour or so soldering up two different size jets for the main jet and idle jet. I installed a #64 main jet and the hotter W-18 Champion plugs and WOW what a difference it made. Our elevation is around 700 ft. the table in the manual says #63. By the way, I was able to buy all the drills and a hand held drill brace at our local hobby shop. I am going back to buy another load of various sizes. Again, THANK YOU ALL!!

11-16-2015, 01:22 AM	#1
1930marie Senior Member Join Date: Sep 2015 Location: Oregon Posts: 238	Soldering up Zenith jets Sponsored Links (Register now to hide all advertisements) Thanks to all for all the suggestions to fix my rich mix fouled plugs problem. I spent only a 1/2 hour or so soldering up two different size jets for the main jet and idle jet. I installed a #64 main jet and the hotter W-18 Champion plugs and WOW what a difference it made. Our elevation is around 700 ft. the table in the manual says #63. By the way, I was able to buy all the drills and a hand held drill brace at our local hobby shop. I am going back to buy another load of various sizes. Again, THANK YOU ALL!!