The Ford Barn

Karl · 10-26-2015, 07:25 PM

Been thinking of adding an accessory oil gauge . On an original 1934 Block if you wanted to install an accessory oil pressure gauge either mechanical or electric where and how would you place the sensor? Karl

Karl · 10-26-2015, 10:42 PM

You must be able to do it because they did it with the Chex gauges . Perhaps if any one has the instructions for installing one of these it would help me -Karl

Brian · 10-26-2015, 10:50 PM

Karl, at back of block, behind cyl # 8, on the bell housing are two 1/4 pipe plugs. Either one of them will do.

deuce_roadster · 10-26-2015, 10:55 PM

Sponsored Links (Register now to hide all advertisements)

On the driver's side of the block on the bell housing there are pipe plugs and the one that is vertical is the one you would use. I have an oil chex gauge in my 32 5w and the "sender" is basically an on/off switch that operates an electromagnet that changes the display from OFF to ON when oil pressure causes it completes the circuit.

10-26-2015, 07:25 PM	#1
Karl Senior Member Join Date: May 2010 Location: Manawatu, New Zealand Posts: 1,420	1934 Acc Oil Pressure Sensor Been thinking of adding an accessory oil gauge . On an original 1934 Block if you wanted to install an accessory oil pressure gauge either mechanical or electric where and how would you place the sensor? Karl

10-26-2015, 10:42 PM	#2
Karl Senior Member Join Date: May 2010 Location: Manawatu, New Zealand Posts: 1,420	Re: 1934 Acc Oil Pressure Sensor You must be able to do it because they did it with the Chex gauges . Perhaps if any one has the instructions for installing one of these it would help me -Karl

10-26-2015, 10:50 PM	#3
Brian Senior Member Join Date: May 2010 Location: Masterton, New Zealand Posts: 4,096	Re: 1934 Acc Oil Pressure Sensor Karl, at back of block, behind cyl # 8, on the bell housing are two 1/4 pipe plugs. Either one of them will do. __________________ Unfortunately, two half wits don't make a whole wit!

10-26-2015, 10:55 PM	#4
deuce_roadster Senior Member Join Date: Oct 2011 Location: Shelton, WA Posts: 4,043	Re: 1934 Acc Oil Pressure Sensor Sponsored Links (Register now to hide all advertisements) On the driver's side of the block on the bell housing there are pipe plugs and the one that is vertical is the one you would use. I have an oil chex gauge in my 32 5w and the "sender" is basically an on/off switch that operates an electromagnet that changes the display from OFF to ON when oil pressure causes it completes the circuit.