The Ford Barn

johnmi · 06-14-2015, 05:32 PM

How to check rear axle housing bolt holes to see if they have a taper with out messing them up. John

BRENT in 10-uh-C · 06-14-2015, 08:55 PM

Sponsored Links (Register now to hide all advertisements)

With a pitch gauge, ...however it really does not matter. Screw a bolt into the differential housing and check how it threads in. If loose, consider using a thread sealant.

06-14-2015, 05:32 PM	#1
johnmi Member Join Date: May 2010 Posts: 94	rear axle housing How to check rear axle housing bolt holes to see if they have a taper with out messing them up. John

06-14-2015, 08:55 PM	#2
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,972	Re: rear axle housing Sponsored Links (Register now to hide all advertisements) With a pitch gauge, ...however it really does not matter. Screw a bolt into the differential housing and check how it threads in. If loose, consider using a thread sealant. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .