04-22-2015, 01:33 PM
|
#1 |
|
Senior Member
Join Date: Dec 2010
Location: newark ohio
Posts: 569
|
brake switch
I put an aftermarket brake switch on the 30 roadster. The problem is that the shaft has to be almost completely depressed into the switch housing before the circuit will open. The brake rod plunger can be all the way against the crossmember and the circuit wont open. Is it possible that the switch is bad?
|
|
|
«
Previous Thread
|
Next Thread
»
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 04:17 PM.