The Ford Barn

Peterooster · 02-02-2015, 08:03 PM

I need to rebuild my B4205 ring gear carrier due to a spun bearing, the bearing size for the shaft is known.I need the size for the part where the bearing face is worn. Pete

Ken/Alabama · 02-02-2015, 08:29 PM

How about what year and car you workin on ? I / we could be of more help knowing a little more .

Kurt in NJ · 02-02-2015, 08:46 PM

I suspect it is model A/32 --I don't know the size, i do have a NOS one, but won't be where it is till the weekend, shim it behind the bearing till you get preload with nominal gasket thickness

Peterooster · 02-03-2015, 07:48 PM

Quote:

Originally Posted by Ken/Alabama

How about what year and car you workin on ? I / we could be of more help knowing a little more .

It is a 1932 the last year for this carrier. Pete

Russ/40 · 02-03-2015, 08:19 PM

You know Pete, if you knurl it you can use your existing one. Just have it knurled and use some loctite, and it will outlast you.

Peterooster · 02-03-2015, 08:27 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by Russ/40

You know Pete, if you knurl it you can use your existing one. Just have it knurled and use some loctite, and it will outlast you.

It is worn .010", I am more concerned with the bearing face. Knurling a good idea, thanks. Pete

02-02-2015, 08:03 PM	#1
Peterooster Member Join Date: May 2010 Location: North Brunswick NJ Posts: 74	Ring carrier dimensions I need to rebuild my B4205 ring gear carrier due to a spun bearing, the bearing size for the shaft is known.I need the size for the part where the bearing face is worn. Pete

02-02-2015, 08:29 PM	#2
Ken/Alabama Senior Member Join Date: May 2010 Location: Alabama Posts: 3,395	Re: Ring carrier dimensions How about what year and car you workin on ? I / we could be of more help knowing a little more .

02-02-2015, 08:46 PM	#3
Kurt in NJ Senior Member Join Date: May 2010 Location: on the Littlefield Posts: 6,556	Re: Ring carrier dimensions I suspect it is model A/32 --I don't know the size, i do have a NOS one, but won't be where it is till the weekend, shim it behind the bearing till you get preload with nominal gasket thickness

02-03-2015, 08:19 PM	#5
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: Ring carrier dimensions You know Pete, if you knurl it you can use your existing one. Just have it knurled and use some loctite, and it will outlast you.