The Ford Barn

chuck stevens · 10-12-2014, 10:05 AM

Does anyone sell c cab plans for the early t's? I would like to get a running chassis and build a body for it. Thanks Chuck

dumb person · 10-14-2014, 02:03 AM

Not that i know of but you can make it up out of your head and it will work fine because no 2 home made cabs of the era were the same.
Put the seat about 28 inches back from the firewall, firewall should be really close to cylinderhead, like slightly over it with a cut in it to lift the head over the valves.

chuck stevens · 10-14-2014, 05:45 AM

Sponsored Links (Register now to hide all advertisements)

Thanks for the help, I'm open to any ideas.

Quote:

Originally Posted by dumb person

Not that i know of but you can make it up out of your head and it will work fine because no 2 home made cabs of the era were the same.
Put the seat about 28 inches back from the firewall, firewall should be really close to cylinderhead, like slightly over it with a cut in it to lift the head over the valves.

10-12-2014, 10:05 AM	#1
chuck stevens Senior Member Join Date: May 2010 Location: upstate new york Posts: 758	c cab plans Does anyone sell c cab plans for the early t's? I would like to get a running chassis and build a body for it. Thanks Chuck

10-14-2014, 02:03 AM	#2
dumb person Senior Member Join Date: Apr 2011 Location: South pacific island Posts: 1,724	Re: c cab plans Not that i know of but you can make it up out of your head and it will work fine because no 2 home made cabs of the era were the same. Put the seat about 28 inches back from the firewall, firewall should be really close to cylinderhead, like slightly over it with a cut in it to lift the head over the valves. __________________ <Link> This is how we roll<Link> "I'm Convinced that no one really reads posts anymore; they just fabricate what they think the post says then ramble on about red herrings."--Bob Outcasts rules of old cars #1 Fun is imperative, mainstream is overrated #2 If they think it is impossible, prove them wrong #3 If the science says it impossible you are not being creative enough. #4 No shame in recreating something you never had #5 If it were not for the law & physics you would be unstoppable