The Ford Barn

ReggieK · 08-01-2014, 07:31 PM

I have two column drops with different numbers on them, and also are made different. Once installed you would not know any difference. Has anyone seen the slotted variation, and any reason for the slot? My thoughts are to make the steering lock easier to install. Any thoughts?

Andy · 08-01-2014, 07:51 PM

The slot wa cut by someone so they could take it apart without pulling the pin from the on off lever.

ReggieK · 08-01-2014, 07:57 PM

I wondered about that, but why the different number? Does it not mean anything? I have had both of these over 40 years, and it was this way when I took it apart.

GSCOV · 08-03-2014, 01:16 PM

It may be the different colors giving the illusion, but one looks like a bigger diameter than the other. Could be one is passenger/pickup and the other a BB type truck? Remember that this was used on 33 and 34 trucks also.

ReggieK · 08-05-2014, 04:08 PM

Sponsored Links (Register now to hide all advertisements)

The one is in primer, the other is original paint, the diameter is the same, as I said all is the same except the slot. Don't think that anyone cut the slot, because the round hole would show on the edges of the slot if the hole was there to begin with, so I believe part came from mfg. with slot. Could be a truck unit. Just curious to see if anyone had seen this type of drop.

08-01-2014, 07:51 PM	#2
Andy Senior Member Join Date: May 2010 Location: Kerrville, Tx Posts: 2,879	Re: 32 Column Drop The slot wa cut by someone so they could take it apart without pulling the pin from the on off lever.

08-01-2014, 07:57 PM	#3
ReggieK Senior Member Join Date: Sep 2013 Location: Troutman, NC Posts: 119	Re: 32 Column Drop I wondered about that, but why the different number? Does it not mean anything? I have had both of these over 40 years, and it was this way when I took it apart.

08-03-2014, 01:16 PM	#4
GSCOV Senior Member Join Date: May 2010 Location: Connecticut Posts: 979	Re: 32 Column Drop It may be the different colors giving the illusion, but one looks like a bigger diameter than the other. Could be one is passenger/pickup and the other a BB type truck? Remember that this was used on 33 and 34 trucks also.

08-05-2014, 04:08 PM	#5
ReggieK Senior Member Join Date: Sep 2013 Location: Troutman, NC Posts: 119	Re: 32 Column Drop Sponsored Links (Register now to hide all advertisements) The one is in primer, the other is original paint, the diameter is the same, as I said all is the same except the slot. Don't think that anyone cut the slot, because the round hole would show on the edges of the slot if the hole was there to begin with, so I believe part came from mfg. with slot. Could be a truck unit. Just curious to see if anyone had seen this type of drop.