The Ford Barn

soder33 · 06-25-2014, 01:31 PM

This may seem like a dumb question, but where would the sender for a water temp gauage go on a 1933 V8 engine go. There is no area tapped in the head or on the front mounted water pumps.

G.M. · 06-25-2014, 02:47 PM

There are pumps that have a drilled and tapped boss for a temperature bulb. G.M.

Terry,OH · 06-25-2014, 03:12 PM

For 32, 33-34 it was installed into the radiator hose.

soder33 · 06-25-2014, 06:05 PM

Thanks for the replies.

2ndgeer · 06-25-2014, 06:29 PM

Sponsored Links (Register now to hide all advertisements)

Here's the fitting for a mechanical temperature gauge installed in the radiator hose in my '34 Ford pickup.

06-25-2014, 01:31 PM	#1
soder33 Junior Member Join Date: May 2010 Location: Hudson WI Posts: 9	water Temp gauage on 33 Flathead This may seem like a dumb question, but where would the sender for a water temp gauage go on a 1933 V8 engine go. There is no area tapped in the head or on the front mounted water pumps. __________________ Soder33

06-25-2014, 02:47 PM	#2
G.M. Senior Member Join Date: May 2010 Location: Florida and Penna. Posts: 4,471	Re: water Temp gauage on 33 Flathead There are pumps that have a drilled and tapped boss for a temperature bulb. G.M. __________________ www.fordcollector.com

06-25-2014, 03:12 PM	#3
Terry,OH Senior Member Join Date: May 2010 Posts: 5,187	Re: water Temp gauage on 33 Flathead For 32, 33-34 it was installed into the radiator hose.

06-25-2014, 06:05 PM	#4
soder33 Junior Member Join Date: May 2010 Location: Hudson WI Posts: 9	Re: water Temp gauage on 33 Flathead Thanks for the replies. __________________ Soder33