NOS Steering Sector - What Year ?

[FL&WVMIKE]

I have this NOS Genuine Ford Steering Sector, but I am confused as to the year. I am hoping that some Fordbarners know more than I do about it.
Using the Green Book, I thought that I could figure it out, but it is confusing.
The things that are confusing are;
..... There are two Part Numbers for 1933-1934. One for a 13-1 Ratio and one for a 15-1 Ratio.
..... 1935 has it's own Part Number.
..... 1936 has it's own Part Number.
..... The big trucks have their own Part Numbers.
Can anyone recognize which sector this is ?
Thank you,
MIKE (mikeburch)
CLICK ON PHOTOS TO ENLARGE - Twice

[Andy]

I think it is 35 or 36. Does it have a number stamped on the center tooth? 15 is 35 and 17 is 36.

[FlatheadTed]

Mike it looks like a 34 as well ,the wider spline is in line with centre of the teeth. theres not a lot between 34and 35

[FL&WVMIKE]

Originally Posted by Andy

I think it is 35 or 36. Does it have a number stamped on the center tooth? 15 is 35 and 17 is 36.

ANDY ......................
By golly, I looked and it does have a "15", stamped on the backside of the center tooth ! So, that means that it is for my '35.
Do you know if it is the same for 1934 ?
Thank you,
MIKE (mikeburch)

[Andy]

34 and 35 are different. The teeth are slanted in different directions and the 35 shaft is shorter.It is a 35 shaft.

[FL&WVMIKE]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Andy

34 and 35 are different. The teeth are slanted in different directions and the 35 shaft is shorter.It is a 35 shaft.

Andy ....................
Thank you for sharing this information !
I appreciate it very much !
MIKE (mikeburch)