Clutch inspection cover

[firechief5215]

I have the early 28 aa that has the multi disc clutch 3 speed transmission.It also has the parking brake on the left side of the driver. I pulled the floor up and noticed that someone took a flat inspection cover and welded a piece of approximately 1" strip of metal on a angle to cover this clutch inspection hole.Can someone tell me or show me what should be on this truck . I am trying to clean up the mess someone made of our truck. Thanks Billy

[Tom Wesenberg]

The cover on the far left is for the multiplate clutch housing. The middle one came next, then a short time later the vents were added.

The AA 4 speed clutch housing had a square cover, and I can't find mine to take a picture of it.

[firechief5215]

Would this be for the multi disc clutch. I was told it was but from what I have read that in not the case Thanks Billy

[Tom Wesenberg]

Originally Posted by firechief5215

Would this be for the multi disc clutch. I was told it was but from what I have read that in not the case Thanks Billy

No, that's the first style for the single plate clutch.

[firechief5215]

Does anyone out there have one 4 sale Thanks Billy

[Steve Plucker]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by firechief5215

Does anyone out there have one 4 sale Thanks Billy

Billy,

Have you tried Bert's in Denver, CO?

They have tons of original parts for the Model A and may be able to help you out there as well as the guys on the barn.

Pluck

[firechief5215]

Thank you for your replies I will contact them this week Billy

[SteveB31]

We do have some. $6

Steve Becker
Berts Model A Center
www.modelastore.com