|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Aug 2013
Posts: 5
|
![]()
I cracked the rr quarter glass in my 29 A tudor sedan.I have removed all parts and am down to the glass in the channels.I cannot get the glass out!The channels look to be riveted in,etc. but glass has been replaced before I got the car.Can anyone help me on this?
Thanks |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 6,039
|
![]()
Oz, first, welcome.
Not to put you off, but you can do a search on this topic. (see the tool bar above). It has been discussed many times before in great detail. But in short, it involves removing the screws on the support panels and pulling the panels out enough to remove the glass from below. The search will gain you some step-by-step info. Good luck. If after reading the previous posts you still have questions, come on back.
__________________
Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole. ![]() |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Junior Member
Join Date: Aug 2013
Posts: 5
|
![]()
I got the glass out! After pulling all the headliner and window trim the glass came out of the top side,not the bottom.Whew! Hope this helps someone else.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jun 2012
Posts: 559
|
![]() Sponsored Links (Register now to hide all advertisements)
![]()
__________________
1928 Model A Business Coupe Rebuild picture gallery here The light at the end of the tunnel has been turned off due to budget cuts. |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|