The Ford Barn

gwillford · 03-17-2023, 03:44 PM

Question. Are the felt window channels glued in place on a 30 Murray town sedan? I see no evidence of clip holes in the door or clips on my existing worn out channels. Thanks! George

Tinbasher · 03-18-2023, 09:40 AM

With the Coachbuilt body the run channels would have been nailed into place. (In the bottom of the channel) or screwed into place. Usually at the top and the bottom of the channel. I'm not sure if there is anything in the Judging Standards. (The body detail information is limited).

Oldbluoval · 03-19-2023, 05:24 AM

Sponsored Links (Register now to hide all advertisements)

Nailed with flat head brads

03-17-2023, 03:44 PM	#1
gwillford Junior Member Join Date: Sep 2022 Posts: 22	30 Murray town sedan window felt channels Question. Are the felt window channels glued in place on a 30 Murray town sedan? I see no evidence of clip holes in the door or clips on my existing worn out channels. Thanks! George

03-18-2023, 09:40 AM	#2
Tinbasher Senior Member Join Date: May 2010 Location: Innisfil, Ontario Canada Posts: 1,205	Re: 30 Murray town sedan window felt channels With the Coachbuilt body the run channels would have been nailed into place. (In the bottom of the channel) or screwed into place. Usually at the top and the bottom of the channel. I'm not sure if there is anything in the Judging Standards. (The body detail information is limited).

03-19-2023, 05:24 AM	#3
Oldbluoval Senior Member Join Date: Jun 2015 Location: Signal Mtn, TN (SE TN) Posts: 2,591	Re: 30 Murray town sedan window felt channels Sponsored Links (Register now to hide all advertisements) Nailed with flat head brads