|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Mar 2012
Location: lexington sc
Posts: 456
|
![]()
hello all
can i paint my rad with out making any problems i do not want to start over heating if so what do i use thank you kevin 1930 model a tudor 1923 model t roadster p/u |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jun 2011
Location: Westchester County, NY
Posts: 632
|
![]()
It is my understanding that there is a special radiator paint. Regular paint should NOT be used. the radiator paint should only lightly be sprayed onto the radiator and DOES reduce the cooling a little. This is information from my discussion with the owner of Natick Radiators in Natick Mass. I have not yet painted mine and am not an expert. I just tend to over-research things.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Member
Join Date: Aug 2012
Location: Gwinn, MI
Posts: 46
|
![]()
Eastwood sells rattlecans of Radiator Black paints, both Gloss & Satin. I think the satin looks better on an A. $14.99 a can. Go lightly.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Mar 2013
Location: Bend Or.
Posts: 1,080
|
![]()
I just had my radiator in the shop for a leak, it took them two days to boil the paint off. Do not paint it! The issue is the are tiny bubbles created when the paint is subjected to the heat of the engine. This creates an air space, and cooling ability is reduced. They do use a special radiator paint. If it were me and I wanted to paint it, I would take it to a shop, have it cleaned and painted. Good maintenace.
I don't think it would be that expensive, they charged my $60 to clean, repair and paint mine.
__________________
Bill Worden 1929 Roadster 1929 Briggs Town Sedan 1930 Closed Cab pickup 1931 Coupe 2 Smith Motor Compressors 1951 Ford F1 High Desert Model A's |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Dallas
Posts: 524
|
![]()
Here in TX where it can be 108 in the summer easy, we paint ours. I like a semi gloss sold at Ace Hardware. Never had any heating problems. Maybe they sell special radiator paint but I'm willing to be your local radiator shop doesn't use it.
__________________
DMAFC |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Mar 2011
Location: Noxon Montana
Posts: 532
|
![]() Sponsored Links (Register now to hide all advertisements)
__________________
'31 Fordor Deluxe 2W Briggs 170-B / blackwalls '41 Fordor Deluxe / 2-duece flattie '66 1/2 Dodge Charger '14 100th Anniversary Challenger Limited Edition. Semper Fidelis ![]() |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: St Charles , Missouri
Posts: 2,032
|
![]()
I have a great radiator shop here in west County St. Louis do the "A" radiators... and I always have them leave it unpainted..... so I can see the repairs and condition, and see for myself before I paint & install. I have used some of the black BBQ grill paints, semigloss and other flats before.... carefull not to get too heavy but to coat it.... I have never had a problem with any paint causing an overheating problem.... In my experience..... If there is a cooling problem... if you think think the paint is the problem.. it is really probably something else... radiator poor flow, clogged tubes, engine has scale and debris .. etc
I would suggest using a infared temperature meter to check the heat of the radiator top to bottom, left to right to identify how it is really cooling and flowing... of course if you hit a cool spot with a low reading you'll know you're not getting flow in that area. I think most of the standard spray can paints of your choice will do the job... your probably just better off with one of the thinner varieties. Flat black BBQ or otherwise. Give it good overall coverage..and you should be fine. Good luck Larry S. |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
|
![]()
I've been using Krylon semi flat black for years with no problems.
|
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Aug 2012
Location: Gwinn, MI
Posts: 46
|
![]()
Here's Eastwood's special radiator paint:
http://www.eastwood.com/ew-radiator-...sol-12-oz.html They also have it in satin finish as P/N: 10340Z Works fine on my radiator, but plan on a black trigger finger! |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
![]()
I've also used semi gloss black in a spray can and had no problems. Spray from both left and right as you face the radiator, and you'll get a light coat of paint on the visible part, but it really doesn't coat the fins very far back. It'll look good and cool fine, if the radiator isn't plugged up.
|
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
![]()
Painting radiators is mainly to prevent external corrosion of the fins & tubes. To "freshen" up my core, I've dipped a soft paintbrush in watery, liguid, stoveblack and passed it across the fins. It'll just wipe off the shell, if you "slip"! Bill W.
__________________
"THE ASSISTANT GURU OF STUFF" |
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: Mar 2012
Location: lexington sc
Posts: 456
|
![]()
hello
thank you for the replays i think i will use eastwwod rad pant kevin 1930 model a tudor 1923 model t roadster p/u |
![]() |
![]() |
![]() |
#13 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
![]()
I paint mine cause it looks slick
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|