The Ford Barn

cbillelder · 09-28-2010, 08:07 PM

PAN IS SOLD

For sale is an 8RT rear sump oil pan for the late '49-'53 flathead motors (the one with the big clean-out hole). This part came off an industrial engine and has the dipstick and tube located on the passenger side. The pan is clean inside with no rust or dents and is painted black. The oil pickup has also been gunked and is clean. The dip stick tube I have for it needs to be gunked. I only have an 8BA dipstick in good condition for it, but I have marked it off with tape where it needs to be cut off and scribed for "Full", "Safe", and "Low" for the 8RT applications. This is the pan of choice for tie rod clearance when installed in some pre-'48 Fords or hot rod applications. Price is $50 plus shipping. Questions, call 970-330-6958 or email [email protected]

09-28-2010, 08:07 PM	#1
cbillelder Senior Member Join Date: May 2010 Posts: 961	'49-'53 8RT Flathead Oil Pan/Pickup City: Greeley State: Colorado Price: $50 PAN IS SOLD For sale is an 8RT rear sump oil pan for the late '49-'53 flathead motors (the one with the big clean-out hole). This part came off an industrial engine and has the dipstick and tube located on the passenger side. The pan is clean inside with no rust or dents and is painted black. The oil pickup has also been gunked and is clean. The dip stick tube I have for it needs to be gunked. I only have an 8BA dipstick in good condition for it, but I have marked it off with tape where it needs to be cut off and scribed for "Full", "Safe", and "Low" for the 8RT applications. This is the pan of choice for tie rod clearance when installed in some pre-'48 Fords or hot rod applications. Price is $50 plus shipping. Questions, call 970-330-6958 or email [email protected] Last edited by cbillelder; 10-10-2013 at 08:27 AM.