|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
03-19-2013, 04:30 PM
|
#1 |
|
Member
Join Date: Sep 2011
Location: Winchester Bay OR
Posts: 93
|
gluing down top bubbles
'31 CCPU prior owner welded a steel top on it.
drilled holes 2" apart and installed fabric and hide-um with pop rivets in the sunshine here yesterday. put her in the shop, this morning there are a couple of small bubbles, Tried to drill out a couple of the rivets to pull the fabric and they spun almost tearing the fabric. My thought is to use a syringe with a needle and squirt some glue into the little bubbles. Anybody done this? and know of a thin type of glue that will squirt? tnx Greg |
|
|
«
Previous Thread
|
Next Thread
»
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 10:34 AM.