The Ford Barn

Rowdy · 07-26-2010, 09:12 AM

I dissassembled a AA u-joint last night as a lost resort to try to free it up. It had decent monement along one axis, but after trying deveral different things over the last 3 weeks it still took a 12" crecent to get movement on the other axis. In the proccess of dissassembly 2 of the lock rings broke. Are there any replacements for these or is it best to make them from piston pin lock rings? The piston pin lock rings have a very simular arch and very little difference in the wire size. Thanks Rod

rollingsculpture · 07-26-2010, 10:32 AM

post that on the AA forum and pictures will help those guys too

http://forums.aa-fords.com/

Rowdy · 07-26-2010, 11:17 AM

I have tried several times in the past to register, but can not read the security code and refresh it too many times in the attemp, but still can not read it. Maybe I am too color blind. Rod

Rowdy · 07-26-2010, 11:06 PM

Was running out of time before work today, so went ahead and made them from the piston lock rings. Worked out well. All assembled and ready for years of good service. Rod

rollingsculpture · 07-26-2010, 11:38 PM

terrific!! can you show us what your working on ?, i dont remember you posting any AA pics of your project.

Rowdy · 07-26-2010, 11:44 PM

Sponsored Links (Register now to hide all advertisements)

I am working on this U-joint to sell. I hate selling junk. Still working on the delivery some, but with my job ending soon, just trying to get ahead abit. Have about 11 things in the proccess of being restored and ready for resale. This u-joint is one I have had laying in the parts barn for awhile. Possibly pic's tommorrow as I did take afew, but left the camera on the bench. Rod

Rowdy · 07-27-2010, 08:22 AM

Here are the pic's you wanted to see. Pic's of my delivery can be seen in my Album. Rod

07-26-2010, 09:12 AM	#1
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	AA U-joint Lock Ring I dissassembled a AA u-joint last night as a lost resort to try to free it up. It had decent monement along one axis, but after trying deveral different things over the last 3 weeks it still took a 12" crecent to get movement on the other axis. In the proccess of dissassembly 2 of the lock rings broke. Are there any replacements for these or is it best to make them from piston pin lock rings? The piston pin lock rings have a very simular arch and very little difference in the wire size. Thanks Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!

07-26-2010, 10:32 AM	#2
rollingsculpture Senior Member Join Date: May 2010 Location: Takoma park md Posts: 271	Re: AA U-joint Lock Ring post that on the AA forum and pictures will help those guys too http://forums.aa-fords.com/ __________________ Rust and roll will never die

07-26-2010, 11:17 AM	#3
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: AA U-joint Lock Ring I have tried several times in the past to register, but can not read the security code and refresh it too many times in the attemp, but still can not read it. Maybe I am too color blind. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!

07-26-2010, 11:06 PM	#4
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: AA U-joint Lock Ring Was running out of time before work today, so went ahead and made them from the piston lock rings. Worked out well. All assembled and ready for years of good service. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!

07-26-2010, 11:38 PM	#5
rollingsculpture Senior Member Join Date: May 2010 Location: Takoma park md Posts: 271	Re: AA U-joint Lock Ring terrific!! can you show us what your working on ?, i dont remember you posting any AA pics of your project. __________________ Rust and roll will never die

07-26-2010, 11:44 PM	#6
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: AA U-joint Lock Ring Sponsored Links (Register now to hide all advertisements) I am working on this U-joint to sell. I hate selling junk. Still working on the delivery some, but with my job ending soon, just trying to get ahead abit. Have about 11 things in the proccess of being restored and ready for resale. This u-joint is one I have had laying in the parts barn for awhile. Possibly pic's tommorrow as I did take afew, but left the camera on the bench. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!