|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Feb 2019
Location: Atlanta, GA
Posts: 321
|
![]()
Is it possible to change the rear motor mounts one at a time with the motor in the car and no frame spreader?
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: VA
Posts: 1,448
|
![]()
It is a toss up. When I reinstalled my engine in 2020, I didn’t need a spreader.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Santee Calif.
Posts: 519
|
![]()
Can it be done.......sure, but I don't think that you'll ever want to do it that way again.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jul 2010
Location: Pennsylvania
Posts: 1,117
|
![]()
I've done it. Lots of lube and mallets.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 6,022
|
![]()
A small bottle jack and 2X4 is all that is needed to spread the frame enough to do the job easily.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,532
|
![]() Sponsored Links (Register now to hide all advertisements)
I did a comparison between an original set of Engine Rear Support Cushions A-5092 Inner and A-5094 Outer that were made by Firestone. The Firestone cushions were laminated rubber with a one ply cloth inner layer. The original Firestone cushions are thinner than the rubber reproductions. So I abrade some rubber off of the thickness of the inner reproduction cushions, about 1/16" to 3/32". You can see the original Firestone Cushions on Vince Falter's Ford Garage https://www.fordgarage.com/pages/aen...rtcushions.htm
__________________
Bob Bidonde |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Feb 2019
Location: Atlanta, GA
Posts: 321
|
![]() |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,410
|
![]() |
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 6,022
|
![]() |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 6,022
|
![]() |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|