|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-28-2023, 01:52 PM | #1 |
Junior Member
Join Date: Nov 2023
Posts: 9
|
Correct Valve Stem/Tube Type?
For some reason I've managed to make it this far in life without learning how to match valve stems with wheels.
Ordering tubes for a new set of Coker Tires that will be mated to 1935 16" wires... I see that tubes are offered in Center Stem, Center Bent Stem, and Offset Stem. Which is the correct choice for these wheels? |
12-28-2023, 02:20 PM | #2 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,125
|
Re: Correct Valve Stem/Tube Type?
Look at your wheels.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-31-2023, 12:08 AM | #3 |
Junior Member
Join Date: Nov 2023
Posts: 9
|
Re: Correct Valve Stem/Tube Type?
Sponsored Links (Register now to hide all advertisements)
I guess these wheels are all offset, where Model A are all center stems. It turns out I ordered tubes with the wrong offset valve stem, TR440. These stems are too long for these wheels. Looking on the Coker website I ordered another set of tubes with a TR13 stem which should hopefully be correct. Hopefully this random information helps someone out in the future. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|