Turn Signal Information

[Ron/IA]

One of our club members has a after-market turn signal on the Tudor he recently purchased. It is not operating correctly, and we are trying to remedy the problem (we think it is wiring).

I am trying to find a schematic and instructions for the unit. The unit has a couple of patent numbers, and some information has been found. However the info thus far is for a 3-wire unit, and his unit is 5-wire. It is similar in shape as a Signal-Stat.

I also did a search on Fordbarn archieves, and have found numerous schematics and information, but none has matched the unit he has.

Following is the info from the unit:
All State 999
Sears-Roebuck & Co
Simpson-Sears Ltd.
SAE-Q
Pat. No. 3,114,015
Patented 1964
Canada No. 684,104
5-wire
Grn
Red
Yel
Blk (this may be Blu-hard to tell)
Gray

The Canadian patent information yielded more information than the U.S. patent info. But as mentioned above, both were 3-wire.

This is a 40-year old unit (or there-abouts), but I was wondering if any of the Fordbarners may have one, and may still have the instructions that came with it. We would appreciate a copy, and would be willing to compensate accordingly.

Thanks, Ron/IA