Restored My Cracked Steering Wheel

[jrhaelig]

Like many of us I had cracks at the top and bottom of each spoke on my steering wheel.

It was to the point that one of the cracks bloodied my finger a few months ago, so I knew I needed to do something.

Yesterday I mixed up some JB Weld & stuffed the cracks. A few minutes with some 80 grit followed by 150 gave me some excellent results.

A few strokes with a black marker and by golly it's as good as the rest of the truck - and no more bloody fingers!



Flash is a bit bright, but the daylight results are great.