'39 power windows

[Dongw]

Have a '39 standard 2 door sedan and wanting to put power windows in the doors. Has anyone physically done this themselves and can tell me a good place to buy, and what unit will work or not work? Does anyone have an extra set of window felt or window channel kit they would like to sell?

[FlatHeadCoupe]

See currently listed EBay item # 133941491556 for window felt

FlatHeadCoupe

[Dongw]

thanks for the info. the listing is window channel for one door. i need a complete window channel, and garrish mouldings for both doors and rear quarters.

[convert 40]

I used a set of NuRelics window regs. in our 32-3W They bolt in like stock regulators
& work great. A little pricey but are a great product. For a '39 coupe. would be part
#73700-2 $683.00
+

[blucar]

Sponsored Links (Register now to hide all advertisements)

I have a 39 conv. cpe that I converted to power windows. I did a lot of research on the subject due to the fact that most of my friends had poor luck with the units they bought for their project cars.
The units I used were made by a company called Nu-Relics (Nu-Relics.com).. When you look at their web site you will note that Nu-Relics makes a complete duplication of the stock window operator, they then adapt a GM gear drive assembly in lieu of something made out of plastic or cable drive. Nu-Relics also uses GM type switches which do not require relays, etc.
The windows in my conv't are very heavy metal framed units, therefore they need a good power source.
I have used the Nu-Relics on two other car projects. The window run channels are available from Drake, Carpenter and C&G, to name just a few.