The Ford Barn

Tim Ayers · 01-18-2021, 09:51 AM

I'm doing the upholstery on my '28 roadster. The car didn't have seats, just repop springs. I've been "trial fitting" the seats as I go. Is there a bracket that holds the front bottom cushion on the riser or is it the pressure from the back spring set that keeps it in place?

Will N · 01-18-2021, 10:32 AM

Sponsored Links (Register now to hide all advertisements)

There is a lip that runs along the edge of the riser that the seat cushion in place.

01-18-2021, 09:51 AM	#1
Tim Ayers Senior Member Join Date: May 2010 Location: NJ Posts: 6,920	Silly question #2: What keeps the lower seat springs in place on a roadster riser? I'm doing the upholstery on my '28 roadster. The car didn't have seats, just repop springs. I've been "trial fitting" the seats as I go. Is there a bracket that holds the front bottom cushion on the riser or is it the pressure from the back spring set that keeps it in place? Last edited by Tim Ayers; 01-18-2021 at 09:57 AM.

01-18-2021, 10:32 AM	#2
Will N Senior Member Join Date: Jul 2010 Location: Pennsylvania Posts: 1,251	Re: Silly question #2: What keeps the lower seat springs in place on a roadster rise Sponsored Links (Register now to hide all advertisements) There is a lip that runs along the edge of the riser that the seat cushion in place.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode