The Ford Barn

Lawson Cox · 03-10-2019, 02:14 PM

Okay, It's a chebby core, but it should be the same. I have a NOS 37-39 Chevy radiator core that has been in the original box all these years. I cut the box open and it is "white" with corrosion. It's pretty, but it ain't right. How is the best way to remove the corrosion ? Inquiring minds want to know. Thanks.

Phil Gillespie · 03-10-2019, 02:17 PM

Quote:

Originally Posted by Lawson Cox

Okay, It's a chebby core, but it should be the same. I have a NOS 37-39 Chevy radiator core that has been in the original box all these years. I cut the box open and it is "white" with corrosion. It's pretty, but it ain't right. How is the best way to remove the corrosion ? Inquiring minds want to know. Thanks.

Rinse it off with a mixture of white vinegar and water. Followed with good water flush, then blow with air. Thats how i would tackle it.
Phil NZ

B-O-B · 03-10-2019, 10:18 PM

Lawson try spraying with WD 40.

expavr · 03-10-2019, 11:12 PM

Rinse it off with a mixture of white vinegar and water. Followed with good water flush, then blow with air. Thats how i would tackle it.
Phil NZ
I agree. I’ve used vinegar along with iodized salt to take chemical buildup off of brass and copper items over the years. Works good and its cheap.

flatheadmurre · 03-11-2019, 12:42 AM

Sponsored Links (Register now to hide all advertisements)

Electrical contact cleaner is designed to remove oxide without hurting base material...
And there are sets with a cleaner/flush/corrosion protection.
Might cost a bit more then going for an acid...but should be safe..

03-10-2019, 02:14 PM	#1
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,082	Cleaning corrosion off of NOS radiator core Okay, It's a chebby core, but it should be the same. I have a NOS 37-39 Chevy radiator core that has been in the original box all these years. I cut the box open and it is "white" with corrosion. It's pretty, but it ain't right. How is the best way to remove the corrosion ? Inquiring minds want to know. Thanks. __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".

03-10-2019, 10:18 PM	#3
B-O-B Senior Member Join Date: May 2010 Location: Ft Mohave,Az Posts: 2,013	Re: Cleaning corrosion off of NOS radiator core Lawson try spraying with WD 40.

03-10-2019, 11:12 PM	#4
expavr Senior Member Join Date: May 2010 Location: Hansville, WA Posts: 802	Re: Cleaning corrosion off of NOS radiator core Rinse it off with a mixture of white vinegar and water. Followed with good water flush, then blow with air. Thats how i would tackle it. Phil NZ I agree. I’ve used vinegar along with iodized salt to take chemical buildup off of brass and copper items over the years. Works good and its cheap.

03-11-2019, 12:42 AM	#5
flatheadmurre Senior Member Join Date: Apr 2015 Location: Sweden Posts: 3,045	Re: Cleaning corrosion off of NOS radiator core Sponsored Links (Register now to hide all advertisements) Electrical contact cleaner is designed to remove oxide without hurting base material... And there are sets with a cleaner/flush/corrosion protection. Might cost a bit more then going for an acid...but should be safe..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode