The Ford Barn

mrtexas · 03-10-2017, 10:05 PM

I have two flatheads one with a 97(37 motor) and one with a 59 carb(41 motor). The 97 has a flow valve in the inlet gas connection. Where is the float valve for the 59 carb, not in the inlet gas connection?

Mike in AZ · 03-10-2017, 10:40 PM

link to MacVP's website.....needle and seat #9564.....Mike

http://www.vanpeltsales.com/FH_web/F...rd1938to48.jpg

Charlie ny · 03-11-2017, 05:27 AM

Sponsored Links (Register now to hide all advertisements)

mrt,
The valve ( needle and seat ) is in the air horn. Remove the (5) 10-32 screws
that attach the air horn to the bowl flip the ah over and there it is.
Charlie ny

03-10-2017, 10:05 PM	#1
mrtexas Senior Member Join Date: May 2010 Location: Sugar Land, TX Posts: 4,420	Float valves I have two flatheads one with a 97(37 motor) and one with a 59 carb(41 motor). The 97 has a flow valve in the inlet gas connection. Where is the float valve for the 59 carb, not in the inlet gas connection? __________________ 41 woodie https://41fordwoodie.weebly.com/ Last edited by mrtexas; 03-10-2017 at 10:45 PM.

03-10-2017, 10:40 PM	#2
Mike in AZ Senior Member Join Date: May 2010 Location: Waddell, AZ Posts: 2,540	Re: Flow valves link to MacVP's website.....needle and seat #9564.....Mike http://www.vanpeltsales.com/FH_web/F...rd1938to48.jpg

03-11-2017, 05:27 AM	#3
Charlie ny BANNED Join Date: May 2010 Posts: 3,019	Re: Float valves Sponsored Links (Register now to hide all advertisements) mrt, The valve ( needle and seat ) is in the air horn. Remove the (5) 10-32 screws that attach the air horn to the bowl flip the ah over and there it is. Charlie ny

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode