|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
|
|
10-07-2016, 08:34 AM
|
#1 |
|
Senior Member
Join Date: May 2010
Posts: 2,871
|
'49 8BA fan belt part #
Looking for a current part # for the '49 Ford 8BA fane belt. That is the wide, short belt from the crank sheave to the fan sheave. It's about 36" long, (outside measurement), and 11/16" to 3/4" wide. Anyone have a current Gates TR series part number or NAPA ? Thank you.
|
|
|
|
10-07-2016, 08:49 AM
|
#2 |
|
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 11,604
|
Re: '49 8BA fan belt part #
This may help.
http://shoebox-central.com/1949-ford...ulley-fan-belt For the fan pulley to crank I used Gates FHP 5L270 (21/32" x 27 in long.) from NAPA. FHP means fractional horse[power. 21/32 is just 1/32 larger than 5/8 so it works fine. Make sure your belt DOES NOT ride down on the inside dia. of the pulley. It rides only on the sides of the sheave. Be sure and read this about belts. http://blog.micrometl.com/tag/how-do...-missing-belt/ Oh, remember the rule; BUY TWO of EACH. Last edited by 19Fordy; 10-07-2016 at 10:24 AM. |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
10-07-2016, 12:13 PM
|
#3 |
|
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 9,359
|
Re: '49 8BA fan belt part #
Sponsored Links (Register now to hide all advertisements)
36.81" x 3/4". Bob |
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
Hybrid Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 08:25 PM.