Mallory single point distributot

[Art Bjornestad]

Does anyone have the address of the person that can set up my Mallory. My advance only goes to 28 degrees and I would like to get it up to 40. Thanks, Art

[BRENT in 10-uh-C]

My personal recommendation would be to send it to fellow Fordbarner Jim Linder. He goes by BUBBAS IGNITION on Fordbarn. Click on that name find his contact information. Jim is an awesome person to deal with!!

[EHERRICK]

Bubbas speed shop in Speedway Indiana next to the track can do just that. I purchased mine from him after he reset the advance curve

1-888-809-3835


Bubba's Hot Rod Shop
1330 Main Street
Speedway, Indiana 46224
1-888-809-3835
[email protected]

[d.j. moordigian]

Originally Posted by fordgarage

I am not looking to start a debate or challenge you but I am curious what the reason is to desire 40 degrees advance?
It seems excessive to me. (yes, I also know how the original is designed)

X2....You might be able too get 34 degrees. What's your idea?

[Art Bjornestad]

I read that the stock A makes 40 degrees in full advance. Since I don't have a stock A to check, I figured that the factory figures are what I need.

[Dodge]

Sponsored Links (Register now to hide all advertisements)

If your motor is bone stock I would just put it in and add about 4 degrees initial
advance. If you have a high compression head on it 2 degrees.
Then fine tune it from there.