The Ford Barn

John Duden · 05-07-2012, 09:44 PM

Hi Fellas
I am in the process of "fixin up" my grandpa's 62 falcon. I have made new floor boards out of 55 gallon barrels and getting ready to make new leaf spring/bumper frame. It ran good, but it needs a carb kit , points and condenser. What is the point gap supposed to be?
it was running good last week, i took it out for a drive, (up the road and back) i felt the front end start to shake and feel like it was taking lift off, i looked down at the spedometer and it read 90!! i have one brake and it took a quarter of a mile to back her down. DID I MENTION I WAS ON A WIRE BASKET FOR A SEAT??

i went around a corner to fast and the basket tipped over, so i "made" a seat belt, a rachet strap! worked good until it pulled through the floor, so now i lost my seat belt!
the floor is really turning out nice, i willl post some pictures of it later
John

parklane · 05-09-2012, 09:42 PM

I think point gap is around .016" or 16 thou.

Rowdy · 05-11-2012, 10:43 AM

John, which carb does it have. Likely i have a NORS kit for it. Rod

John Duden · 05-11-2012, 11:08 AM

Sponsored Links (Register now to hide all advertisements)

it has a holley, is there a number on it somewhere?
John

05-07-2012, 09:44 PM	#1
John Duden Senior Member Join Date: Jun 2010 Posts: 1,856	62 falcon Hi Fellas I am in the process of "fixin up" my grandpa's 62 falcon. I have made new floor boards out of 55 gallon barrels and getting ready to make new leaf spring/bumper frame. It ran good, but it needs a carb kit , points and condenser. What is the point gap supposed to be? it was running good last week, i took it out for a drive, (up the road and back) i felt the front end start to shake and feel like it was taking lift off, i looked down at the spedometer and it read 90!! i have one brake and it took a quarter of a mile to back her down. DID I MENTION I WAS ON A WIRE BASKET FOR A SEAT?? i went around a corner to fast and the basket tipped over, so i "made" a seat belt, a rachet strap! worked good until it pulled through the floor, so now i lost my seat belt! the floor is really turning out nice, i willl post some pictures of it later John

05-09-2012, 09:42 PM	#2
parklane Senior Member Join Date: May 2010 Location: St.Thomas, ON Canada Posts: 598	Re: 62 falcon I think point gap is around .016" or 16 thou. __________________ If brains were wire, some couldn't short circuit a firefly

05-11-2012, 10:43 AM	#3
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: 62 falcon John, which carb does it have. Likely i have a NORS kit for it. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!

05-11-2012, 11:08 AM	#4
John Duden Senior Member Join Date: Jun 2010 Posts: 1,856	Re: 62 falcon Sponsored Links (Register now to hide all advertisements) it has a holley, is there a number on it somewhere? John