The Ford Barn

60ch · 02-06-2012, 11:14 PM

Is there a copy of the machinists drawing available for the Model A spindle arms. I have 2 sets of arms and the drivers side, with the two balls, are not the same. I would like to know which one is correct. For that matter they both may be wrong. I plan to replace the balls but want to make sure that I have good parts to start with. Thanks, Terry

Jim Parker Toronto · 02-06-2012, 11:43 PM

Check a copy of the Judging Standards, it should tell you the difference. Sorry, mines out in the shop right now....

JoeWay · 02-06-2012, 11:44 PM

Sponsored Links (Register now to hide all advertisements)

Page 282-283 in the Service Bulletins explain the change made in September 1928. The one that has the "straighter" straight arm is the later one.

Joe

02-06-2012, 11:14 PM	#1
60ch Junior Member Join Date: Aug 2010 Posts: 28	spindle arm drawings Is there a copy of the machinists drawing available for the Model A spindle arms. I have 2 sets of arms and the drivers side, with the two balls, are not the same. I would like to know which one is correct. For that matter they both may be wrong. I plan to replace the balls but want to make sure that I have good parts to start with. Thanks, Terry

02-06-2012, 11:43 PM	#2
Jim Parker Toronto Senior Member Join Date: May 2010 Location: Toronto, Ontario, Canada Posts: 1,289	Re: spindle arm drawings Check a copy of the Judging Standards, it should tell you the difference. Sorry, mines out in the shop right now....

02-06-2012, 11:44 PM	#3
JoeWay Senior Member Join Date: May 2010 Location: Quincy CA Posts: 752	Re: spindle arm drawings Sponsored Links (Register now to hide all advertisements) Page 282-283 in the Service Bulletins explain the change made in September 1928. The one that has the "straighter" straight arm is the later one. Joe __________________ 1929 Tudor since 1962 Feather River A's