The Ford Barn

25 TA · 09-22-2011, 09:18 PM

FOUND PROBLEM. A WIRE WAS TO LONG AND AT TIMES WOULD TOUCH GENERATOR SHORTING CAUSING HIGH VOLTAGE. FIXED THE WIRE, NEW POINTS, CONDENSER, NEW 6 VOLT COIL. sTARTS EASY, IDLES GOOD, ADVANCE/RETARD ROD RESPONDS GOOD, WENT ON 30 MILE RIDE, NO PROBLEM.
THANKS TO ALL COMMENTS

THANKS

25 TA

BILL WILLIAMSON · 09-22-2011, 09:24 PM

We all appreciate you reporting the outcome! Some folks don't. This is how we all learn and hopefully help someone with a problem.

25 TA · 09-22-2011, 10:12 PM

Sorry

The wire was located on the generators cut out

Thanks
25 TA

Patrick L. · 09-23-2011, 10:13 AM

Sponsored Links (Register now to hide all advertisements)

Yup, its always good to know what fixed what..

09-22-2011, 09:18 PM	#1
25 TA Junior Member Join Date: Aug 2011 Posts: 8	Update on burning points FOUND PROBLEM. A WIRE WAS TO LONG AND AT TIMES WOULD TOUCH GENERATOR SHORTING CAUSING HIGH VOLTAGE. FIXED THE WIRE, NEW POINTS, CONDENSER, NEW 6 VOLT COIL. sTARTS EASY, IDLES GOOD, ADVANCE/RETARD ROD RESPONDS GOOD, WENT ON 30 MILE RIDE, NO PROBLEM. THANKS TO ALL COMMENTS THANKS 25 TA

09-22-2011, 09:24 PM	#2
BILL WILLIAMSON Senior Member Join Date: Dec 2010 Location: FRESNO, CA Posts: 12,560	Re: Update on burning points We all appreciate you reporting the outcome! Some folks don't. This is how we all learn and hopefully help someone with a problem. __________________ "THE ASSISTANT GURU OF STUFF"

09-22-2011, 10:12 PM	#3
25 TA Junior Member Join Date: Aug 2011 Posts: 8	Re: Update on burning points Sorry The wire was located on the generators cut out Thanks 25 TA

09-23-2011, 10:13 AM	#4
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Update on burning points Sponsored Links (Register now to hide all advertisements) Yup, its always good to know what fixed what..