The Ford Barn

Gruntis · 05-20-2014, 07:01 PM

Howdy Guys, Had a good read through Info here regarding swapping the Stock model a Distributor out for the Self advancing B model unit , Seems like a pretty simple swap although i have run into a snag " I have noticed My B Model Distributor Upper shaft drive tang is located in the centre and not offset like the stock Model A Unit, This means it wont engage with the Middle shaft ofset tang drive when i go to install it, is there a Matching middle shaft i can use , Is it the B Model Middle shaft i need to Find "

Or have i got myself an od Distributor

Beers & Cheers

05-20-2014, 07:01 PM	#1
Gruntis Junior Member Join Date: Feb 2014 Location: South of the Yarra Dixon Line Posts: 12	Newby Distributor Question on B Model swap Howdy Guys, Had a good read through Info here regarding swapping the Stock model a Distributor out for the Self advancing B model unit , Seems like a pretty simple swap although i have run into a snag " I have noticed My B Model Distributor Upper shaft drive tang is located in the centre and not offset like the stock Model A Unit, This means it wont engage with the Middle shaft ofset tang drive when i go to install it, is there a Matching middle shaft i can use , Is it the B Model Middle shaft i need to Find " Or have i got myself an od Distributor Beers & Cheers Last edited by Gruntis; 05-20-2014 at 07:27 PM.